|
|
|
|
|
|
Helix Racing Products Exhaust Springs - Zinc - 63mm 495-6302
|
|
Our Price: $8.49
|
|
|
Zinc plated
Economical
Durable
2 pack
|
|
|
|
|
|
|
|
|
|
Race Tech Shock Shaft Bushings SMSB 1412
|
|
Our Price: $12.38
|
|
|
Rebuild the seal head assembly for a fraction of the cost of new
High-quality, low-friction, Teflon-coated shaft bushings for performance and longevity
14mm x 12mm L
|
|
|
|
|
|
|
|
|
|
No Toil Fast Filter 1243
|
|
Our Price: $14.76
|
|
|
Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles
Flame laminated foam: both stages are not glued but heat sealed to provide maximum air flow
Reticulated foam: increase dirt-stopping surface area and increase foam strength
Strongest glue seams will withstand harsh solvents and gas (although we cant understand why youd want to use them) pull as hard as you can, foam will rip before the glued seam
Light color foam easier to spot where the filter oil has covered and where it has not
OEM size for more dirt stopping capability
Handmade
Every square inch of each filter is inspected for quality
1 year manufacturers
|
|
|
|
|
|
|
|
|
|
JT Sprockets Steel Front Sprocket - 12T JTF1901.12
|
|
Our Price: $16.50
|
|
|
Computer designed to achieve ultimate
strength at minimum weight
JT combines leading-edge technology with top materials to produce
the ultimate quality sprocket range with unbeatable value
Every sprocket meets or exceeds the highest possible
quality standards
Sprockets are heat-treated and beadblasted to reduce material
surface tension
Front sprockets made with top-quality Japanese C45 high carbon
steel and SCM415 chromoly steel alloy
Steel rear sprockets made with top-quality Japanese C45 high carbon steel
Aluminum rear sprockets are made with high strength Austrian 7075 T-6 anodized aluminum
JT aluminum sprockets are about 30% lighter than a comparable steel equivalent, which reduces
un-sprung rotating weight and improves performance
Lightweight front sprockets available for some applications
NOTE: When installing sprockets which differ from OEM sizes, check for proper clearances before operating
|
|
|
|
|
|
|
|
|
|
HiFlo Foam Air Filter HFF5015
|
|
Our Price: $16.65
|
|
|
Hiflofiltro competition off road air filters are manufactured using a special dual-layer foam formulated to maximize filtration with optimum air flow for improved power
Top quality materials and superior construction allow the filter to be used over and over again without any loss of performance
Direct replacement of original equipment filter with no need to change carburetor jets or settings
|
|
|
|
|
|
|
|
|
|
|
JT Sprockets Steel Front Sprocket - 14T JTF1901.14
|
|
Our Price: $17.00
|
|
|
Computer designed to achieve ultimate
strength at minimum weight
JT combines leading-edge technology with top materials to produce
the ultimate quality sprocket range with unbeatable value
Every sprocket meets or exceeds the highest possible
quality standards
Sprockets are heat-treated and beadblasted to reduce material
surface tension
Front sprockets made with top-quality Japanese C45 high carbon
steel and SCM415 chromoly steel alloy
Steel rear sprockets made with top-quality Japanese C45 high carbon steel
Aluminum rear sprockets are made with high strength Austrian 7075 T-6 anodized aluminum
JT aluminum sprockets are about 30% lighter than a comparable steel equivalent, which reduces
un-sprung rotating weight and improves performance
Lightweight front sprockets available for some applications
NOTE: When installing sprockets which differ from OEM sizes, check for proper clearances before operating
|
|
|
|
|
|
|
|
|
|
|
JT Sprockets Steel Front Sprocket - 13T JTF1901.13
|
|
Our Price: $17.00
|
|
|
Computer designed to achieve ultimate
strength at minimum weight
JT combines leading-edge technology with top materials to produce
the ultimate quality sprocket range with unbeatable value
Every sprocket meets or exceeds the highest possible
quality standards
Sprockets are heat-treated and beadblasted to reduce material
surface tension
Front sprockets made with top-quality Japanese C45 high carbon
steel and SCM415 chromoly steel alloy
Steel rear sprockets made with top-quality Japanese C45 high carbon steel
Aluminum rear sprockets are made with high strength Austrian 7075 T-6 anodized aluminum
JT aluminum sprockets are about 30% lighter than a comparable steel equivalent, which reduces
un-sprung rotating weight and improves performance
Lightweight front sprockets available for some applications
NOTE: When installing sprockets which differ from OEM sizes, check for proper clearances before operating
|
|
|
|
|
|
|
|
|
|
PBI Steel Front Sprocket - 14T 855-14
|
|
List Price: $18.95
Our Price: $17.06
Save: $1.89!
|
|
|
CNC machined from high grade alloy steel
Meets or exceeds OEM specifications
Heat treated for long life and less wear
Broached specially for maximum spline to shaft contact
Available in a full range of tooth sizes
|
|
|
|
|
|
|
|
|
|
|
PBI Steel Front Sprocket - 13T 855-13
|
|
List Price: $18.95
Our Price: $17.06
Save: $1.89!
|
|
|
CNC machined from high grade alloy steel
Meets or exceeds OEM specifications
Heat treated for long life and less wear
Broached specially for maximum spline to shaft contact
Available in a full range of tooth sizes
|
|
|
|
|
|
|
|
|
|
|
PBI Steel Front Sprocket - 15T 855-15
|
|
List Price: $18.95
Our Price: $17.06
Save: $1.89!
|
|
|
CNC machined from high grade alloy steel
Meets or exceeds OEM specifications
Heat treated for long life and less wear
Broached specially for maximum spline to shaft contact
Available in a full range of tooth sizes
|
|
|
|
|
|
|
|
|
|
|
JT Sprockets Steel Front Sprocket - 15T JTF1901.15
|
|
Our Price: $17.55
|
|
|
Computer designed to achieve ultimate
strength at minimum weight
JT combines leading-edge technology with top materials to produce
the ultimate quality sprocket range with unbeatable value
Every sprocket meets or exceeds the highest possible
quality standards
Sprockets are heat-treated and beadblasted to reduce material
surface tension
Front sprockets made with top-quality Japanese C45 high carbon
steel and SCM415 chromoly steel alloy
Steel rear sprockets made with top-quality Japanese C45 high carbon steel
Aluminum rear sprockets are made with high strength Austrian 7075 T-6 anodized aluminum
JT aluminum sprockets are about 30% lighter than a comparable steel equivalent, which reduces
un-sprung rotating weight and improves performance
Lightweight front sprockets available for some applications
NOTE: When installing sprockets which differ from OEM sizes, check for proper clearances before operating
|
|
|
|
|
|
|
|
|
|
WPS Fork Seals 16-1057K
|
|
Our Price: $18.49
|
|
|
High quality OEM replacement fork seals
Manufactured to factory specifications
Packaged 1 pair per package
|
|
|
|
|
|
|
|
|
|
PBI Pro Steel Front Sprocket - 15T 48-15
|
|
List Price: $21.95
Our Price: $19.76
Save: $2.19!
|
|
|
The finest countershaft sprocket manufactured in the world
Far exceeds the critical requirements of todays ATVs
Manufactured from steel alloy approaching 200,000 PSI yield
|
|
|
|
|
|
|
|
|
|
Sunstar Steel Front Sprocket - 14T 35714
|
|
Our Price: $20.54
|
|
|
Manufactured from case-hardened chromoly steel for the ultimate in strength and durability.
Parkerizing surface treatment for rust and corrosion resistance.
The excellent OE quality you expect from the SUNSTAR brand.
|
|
|
|
|
|
|
|
|
|
Sunstar Steel Front Sprocket - 12T 35712
|
|
Our Price: $20.54
|
|
|
Manufactured from case-hardened chromoly steel for the ultimate in strength and durability.
Parkerizing surface treatment for rust and corrosion resistance.
The excellent OE quality you expect from the SUNSTAR brand.
|
|
|
|
