|
|
|
|
|
|
NGK Spark Plugs - D8EA 2120
|
|
Our Price: $4.68
|
|
|
Superior construction for serious power
NGK makes plugs for almost any type of application and riding style
Versatile plugs with wide operating heat ranges prevent fouling from running too cool and pre-ignition from running too hot
Features include high-alumina ceramics for improved heat dissipation and electrical insulation, deep-seated copper core for a wider heat range and a nickel alloy tip for longer life
|
|
|
|
|
|
|
|
|
|
NGK Spark Plug Resistor Cover - SD05F - Straight Type 8022
|
|
Our Price: $5.25
|
|
|
NGK spark plug resistor covers are the best protection against radio frequency interference when used with resistor spark plugs
Protect engines from cutting out in wet conditions
For use with 7mm diameter plug wires
Sold each
|
|
|
|
|
|
|
|
|
|
WPS Replacement Battery Bolts 479100
|
|
Our Price: $5.99
|
|
|
Sold in pairs
|
|
|
|
|
|
|
|
|
|
MSR Wheel Spacer Kit 11-1085
|
|
List Price: $6.95
Our Price: $6.25
Save: $0.70!
|
|
|
Black anodized 6061-T6 Aluminum
Hardened steel, zinc-plated
Hardened steel wear surfaces greatly increase wheel bearing and spacer life
|
|
|
|
|
|
|
|
|
|
All Balls Individual Wheel Seal - I.D. x O.D. x W (32x52x7) 30-5207
|
|
Our Price: $6.55
|
|
|
Developed in partnership with KML Bearing
Designed for the difficult operating environment of the Powersports Industry
The All Balls bearing is a premium EMQ quality, hi-speed bearing that features low-drag, double-lip, rubber seals that provide superior exclusion of water and dirt and improved grease retention
I.D. x O.D. x W (32x52x7)
|
|
|
|
|
|
|
|
|
|
HiFlo Oil Filter HF151
|
|
Our Price: $6.81
|
|
|
Manufactured with the worlds highest quality materials
Over 95 years of experience
Test results prove 28% longer service life than OE and leading competitor brands
Lower cost with higher quality when compared to OE filter
|
|
|
|
|
|
|
|
|
|
Moose Wheel Spacer 11-1085
|
|
List Price: $6.95
Our Price: $6.95
|
|
|
Replace or upgrade OEM wheel spacers with these durable parts
Water and dirt grind between wheel bearing seals and soft OEM aluminum wheel spacers; this creates grooves and allows bearing contamination
Moose Racing wheel spacers feature hardened steel contact surfaces
This makes for a tight seal that will last for years and keep your bearings fresh
Our spacers are made from either anodized aluminum with a press fit - hardened steel shell, or solid - hardened and ground bearing steel, depending on application
Upgrade to Moose Racing wheel spacers when you replace damaged wheel bearings, or before you have to
|
|
|
|
|
|
|
|
|
|
Helix Racing Products Exhaust Springs - Zinc - 63mm 495-6302
|
|
Our Price: $8.49
|
|
|
Zinc plated
Economical
Durable
2 pack
|
|
|
|
|
|
|
|
|
|
MSR Standard Clutch Bracket - Polished 1RDKK17
|
|
List Price: $9.95
Our Price: $8.95
Save: $1.00!
|
|
|
Precision cast aluminum with a split perch design allows bending without breaking
Installation hardware included
For non-hydraulic bikes
|
|
|
|
|
|
|
|
|
|
|
All Balls Individual Wheel Seal - I.D. x O.D. x W (25x35x7) 30-3512
|
|
Our Price: $9.16
|
|
|
Developed in partnership with KML Bearing
Designed for the difficult operating environment of the Powersports Industry
The All Balls bearing is a premium EMQ quality, hi-speed bearing that features low-drag, double-lip, rubber seals that provide superior exclusion of water and dirt and improved grease retention
I.D. x O.D. x W (25x35x7)
|
|
|
|
|
|
|
|
|
|
|
Moose Shorty Clutch Lever - Polished 1CNKJ17
|
|
List Price: $9.95
Our Price: $9.95
|
|
|
Polished cast aluminum brake and clutch levers with real bronze bushings
Many clutch levers available in standard length and shorty
Shorty levers are modern-style clutch levers, approximately 1/2 shorter than OEM
Work with OEM or Moose perches
Black and silver available for some applications
|
|
|
|
|
|
|
|
|
|
Parts Unlimited Front Fork Seals - 45mm x 58mm x 8.5/11mm PUP40FORK455069
|
|
List Price: $10.95
Our Price: $10.95
|
|
|
High-quality replacement fork seals and wipers for Japanese and European motorcycles
Made to OEM specifications
Sold in pairs
|
|
|
|
|
|
|
|
|
|
Race Tech Shock Shaft Bushings SMSB 1412
|
|
Our Price: $12.38
|
|
|
Rebuild the seal head assembly for a fraction of the cost of new
High-quality, low-friction, Teflon-coated shaft bushings for performance and longevity
14mm x 12mm L
|
|
|
|
|
|
|
|
|
|
|
Moose Standard Clutch Perch - Polished 1RDKK17
|
|
List Price: $12.95
Our Price: $12.95
|
|
|
Cast and polished 6061 aluminum
Includes cable adjuster and pivot bolt
Many include hot start
Hot starts available separately for some applications
Compatible with OEM and Moose Racing levers
|
|
|
|
|
|
|
|
|
|
|
Parts Unlimited Front Fork Seals - 50mm x 59.6/60mm x 7/10.5mm PUP40FORK455077
|
|
List Price: $13.95
Our Price: $13.95
|
|
|
High-quality replacement fork seals and wipers for Japanese and European motorcycles
Made to OEM specifications
Sold in pairs
|
|
|
|
