|
|
|
|
|
|
EBC CSK Clutch Spring Kit CSK135
|
|
Our Price: $14.45
|
|
|
Always fit new springs which get tired after miles of heat and use.
EBC spring kits are 10% stiffer than standard and are sold in engine sets.
As stated in general fitting/safety instructions, advise customers that lever will feel slightly heavier when uprating springs, and to test ride to acquaint themselves with the change in control.
|
|
|
|
|
|
|
|
|
|
JT Sprockets Steel Front Sprocket - 15T JTF520.15
|
|
Our Price: $15.13
|
|
|
Computer designed to achieve ultimate
strength at minimum weight
JT combines leading-edge technology with top materials to produce
the ultimate quality sprocket range with unbeatable value
Every sprocket meets or exceeds the highest possible
quality standards
Sprockets are heat-treated and beadblasted to reduce material
surface tension
Front sprockets made with top-quality Japanese C45 high carbon
steel and SCM415 chromoly steel alloy
Steel rear sprockets made with top-quality Japanese C45 high carbon steel
Aluminum rear sprockets are made with high strength Austrian 7075 T-6 anodized aluminum
JT aluminum sprockets are about 30% lighter than a comparable steel equivalent, which reduces
un-sprung rotating weight and improves performance
Lightweight front sprockets available for some applications
NOTE: When installing sprockets which differ from OEM sizes, check for proper clearances before operating
|
|
|
|
|
|
|
|
|
|
All Balls Wheel Bearing and Seal Kit 25-1389
|
|
Our Price: $15.25
|
|
|
Contain all of the bearings and seals required to re-fit a wheel
The most extensive line of kits for street, off-road and ATV applications
Wheel bearings typically fail from water and dirt contamination. The All Balls wheel bearing was developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt
The rubber coated outside diameter creates an optimum seal at the hub
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal
|
|
|
|
|
|
|
|
|
|
|
JT Sprockets Steel Front Sprocket - 16T JTF520.16
|
|
Our Price: $15.63
|
|
|
Computer designed to achieve ultimate
strength at minimum weight
JT combines leading-edge technology with top materials to produce
the ultimate quality sprocket range with unbeatable value
Every sprocket meets or exceeds the highest possible
quality standards
Sprockets are heat-treated and beadblasted to reduce material
surface tension
Front sprockets made with top-quality Japanese C45 high carbon
steel and SCM415 chromoly steel alloy
Steel rear sprockets made with top-quality Japanese C45 high carbon steel
Aluminum rear sprockets are made with high strength Austrian 7075 T-6 anodized aluminum
JT aluminum sprockets are about 30% lighter than a comparable steel equivalent, which reduces
un-sprung rotating weight and improves performance
Lightweight front sprockets available for some applications
NOTE: When installing sprockets which differ from OEM sizes, check for proper clearances before operating
|
|
|
|
|
|
|
|
|
|
|
JT Sprockets Steel Front Sprocket - 17T JTF520.17
|
|
Our Price: $19.50
|
|
|
Computer designed to achieve ultimate
strength at minimum weight
JT combines leading-edge technology with top materials to produce
the ultimate quality sprocket range with unbeatable value
Every sprocket meets or exceeds the highest possible
quality standards
Sprockets are heat-treated and beadblasted to reduce material
surface tension
Front sprockets made with top-quality Japanese C45 high carbon
steel and SCM415 chromoly steel alloy
Steel rear sprockets made with top-quality Japanese C45 high carbon steel
Aluminum rear sprockets are made with high strength Austrian 7075 T-6 anodized aluminum
JT aluminum sprockets are about 30% lighter than a comparable steel equivalent, which reduces
un-sprung rotating weight and improves performance
Lightweight front sprockets available for some applications
NOTE: When installing sprockets which differ from OEM sizes, check for proper clearances before operating
|
|
|
|
|
|
|
|
|
|
Sunstar Steel Front Sprocket - 15T 40415
|
|
Our Price: $19.85
|
|
|
Manufactured from case-hardened chromoly steel for the ultimate in strength and durability.
Parkerizing surface treatment for rust and corrosion resistance.
The excellent OE quality you expect from the SUNSTAR brand.
|
|
|
|
|
|
|
|
|
|
Sunstar Steel Front Sprocket - 16T 40416
|
|
Our Price: $19.85
|
|
|
Manufactured from case-hardened chromoly steel for the ultimate in strength and durability.
Parkerizing surface treatment for rust and corrosion resistance.
The excellent OE quality you expect from the SUNSTAR brand.
|
|
|
|
|
|
|
|
|
|
Braking SM1 Semi Metallic Pad 716SM1
|
|
Our Price: $20.30
|
|
|
Delivers dependable, rugged performance certain to satisfy the most demanding sport riders, commuters and touring enthusiasts
Superior performance in wet or dry conditions
SM1 pads are fade-free, noise-free and dust-free
Smoothness, consistency and responsiveness from the lowest to highest possible temperatures
Designed for stainless steel rotors; also excellent on cast iron rotors
Gentle on all rotors
|
|
|
|
|
|
|
|
|
|
BikeMaster Brake Pads H1071
|
|
Our Price: $20.46
|
|
|
Years of constant research and brake dyno testing
Yeilding the latest technology in pad performance
Made at a factory that supplies Japanese OEMs
The highest quality and perfect fit
Formulated for high performance stopping power and with the new technology, long service life
Excellent feel and feedback
Superior fade resistance
Reliability and a name you can trust
|
|
|
|
|
|
|
|
|
|
|
Sunstar Steel Front Sprocket - 17T 40417
|
|
Our Price: $22.85
|
|
|
Manufactured from case-hardened chromoly steel for the ultimate in strength and durability.
Parkerizing surface treatment for rust and corrosion resistance.
The excellent OE quality you expect from the SUNSTAR brand.
|
|
|
|
|
|
|
|
|
|
|
Braking SM1 Semi Metallic Pad 711SM1
|
|
Our Price: $24.24
|
|
|
Delivers dependable, rugged performance certain to satisfy the most demanding sport riders, commuters and touring enthusiasts
Superior performance in wet or dry conditions
SM1 pads are fade-free, noise-free and dust-free
Smoothness, consistency and responsiveness from the lowest to highest possible temperatures
Designed for stainless steel rotors; also excellent on cast iron rotors
Gentle on all rotors
|
|
|
|
|
|
|
|
|
|
Pro Bolt Swingarm Spools - Gold BOB6-G
|
|
Our Price: $24.40
|
|
|
CNC Machined offering a unique and clean design
Screws directly into the provided swing-arm holes
|
|
|
|
|
|
|
|
|
|
|
Pro Bolt Swingarm Spools - Blue BOB6-B
|
|
Our Price: $24.40
|
|
|
CNC Machined offering a unique and clean design
Screws directly into the provided swing-arm holes
|
|
|
|
|
|
|
|
|
|
|
Pro Bolt Swingarm Spools - Red BOB6-R
|
|
Our Price: $24.40
|
|
|
CNC Machined offering a unique and clean design
Screws directly into the provided swing-arm holes
|
|
|
|
|
|
|
|
|
|
|
Pro Bolt Swingarm Spools - Gunmetal Gray - 6mm BOB6-GY
|
|
Our Price: $24.40
|
|
|
CNC Machined offering a unique and clean design
Screws directly into the provided swing-arm holes
|
|
|
|
