Home - Return to Previous Page
Click on image to zoom

Dynojet Power Commander V 14-022

14-022
  • Fuel control for each individual cylinder in a smaller enclosure
  • "Warm-up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
  • Reduced size from the PCIII USB
  • Easy to install
  • USB powered from computer; 9 volt adapter is no longer needed
  • Two-position map-switching function built in
  • Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
  • Gear/speed input allows for map adjustment based on gear
  • Analog input allows user to install any 0-5 volt sensor
  • Build an adjustment table based on analog input such as boost or temperature
  • Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
  • More tuning ranges than PCIII USB
  • Enhanced "accel pump" utility
  • For Offroad and ATV, see appropriate catalog under Moose Power Commanders
  • Made in the U.S.A.

SECONDARY FUEL MODULE

  • Connects to the upper injector rail using OEM connectors
  • The "basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
  • The "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
  • Single cable connection to the PCV
  • See application chart for availability
  • Adjust both upper and lower injectors by as much as +250/-100%
  • Allows for the adjustment of all eight-injectors
  • If gear position input is connected to your PCV, you can adjust all of the injectors on a "per gear" basis
  • Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
  • You can also map each injector separately, giving you up to 48 complete maps

QUICK SHIFTER EXPANSION MODULE

  • The QEM connects to the upper injectors and then into the PCV
  • Once the sensor is attached you will have full Quick Shifter functionality
  • The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
Not Available
Was: $469.95
Sale: $366.95
Save: 22%
Save: $103.00

Description

Product Series

Details

  • 14-022
  • 14-022
  • Dynojet
  • Temporarily Not Available
  • New

Shipping Information

  • Item Requires Shipping
  • 1.6 lbs.
  • Free Lower 48 Shipping over $75!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.